Effect of ultrasound beauty instrument

Method 1: Put it on the probe, turn on the instrument switch to the maximum intensity, and see whether the water spray effect is great, the stronger the atomization effect, the better the import and export effect;

Method 2: Place water in the palm of your hand, place the ultrasound probe at the bottom of your hand, and turn on the instrument switch with maximum intensity. The higher the water in the palm rises, the stronger the vibration induction, and the better the ultrasound beauty instrument induction effect;

Method 3: Pour water into a plastic bottle and place it on the probe of an ultrasound beauty instrument. Observe the height of the water in the bottle as it rises. The higher the effect, the better the introduction effect of the instrument;

Generally, ultrasound beauty instruments should not be turned off and allowed to dry burn the instrument probe. It is best not to insert the probe into the output port before the instrument is working. When it is confirmed that the instrument needs to work, it should be connected to the output port of the instrument probe. It is best to turn off the power switch and start the instrument again for ten minutes after using it; When the instrument is not in use, the three probe wires should be pulled out from the output port and placed in the box. This way, the probe output circuit is not easily disconnected or in poor contact, causing the instrument to not work properly. The three input probes of the instrument should be kept well, and after use, they should be cleaned with water, wiped dry with a dry cloth, and placed in the box. This way, the instrument has a longer lifespan. We hope everyone can take good care of and maintain the instrument;